How To Get Rid Of Mold And Get Your Home Back

Get Rid Of Mold By Yourself - Is It Really Possible?

Mold spores growing in your home can cause allergic reactions in you, your pets and your kids. Mold removal takes them away before they become a problem.

If you want to get rid or mold, there is one thing that you need to understand. Mold is not impossible to get rid of but you have to be persistent.

It is normal to find mold spores in a homes indoor air and surfaces such as clothes, walls, and furniture. Most of the time mold spores found indoors are from outside sources. 

Regular housekeeping cleaning helps keep you to get rid of mold. Cleaning small areas of visible mold, like the one around your shower, is obligatory to maintain sanitary conditions.

When you should be more concerned is when your home has a large-scale of active mold growing. Such problems are most likely to happen when there’s been an on-going water leak, flood, or excessively high levels of humidity in the home. 

Indoor mold growth may lead to high levels of airborne mold spores, which, in turn, can trigger the spread of mold growth from the original source to additional areas of the home having high moisture levels. 

But you can get rid of mold in a few easy steps.

 What You Should Know:

  • Getting Rid Of Mold Is Necessary For Asthmatics
  • Where Does Mold Grow
  • Steps To Get Rid Of Mold
  • How To Prevent Mold From Coming Back

Getting Rid Of Mold Is Necessary For Asthmatics

Possible adverse health effects produced by molds can include allergic, irritating, or toxigenic effects, and even infections, allergic reactions being the most common. 

Symptoms reported by affected people include: respiratory conditions, such as wheezing, difficulty breathing, and shortness of breath, sneezing and/or nasal congestion, eye and/or throat irritation, headaches and fatigue. 

While there is no practical way to eliminate all mold and mold spores in the indoor environment, keeping your home clean and dry can avert extensive mold growth and the ensuing damage.

Damage to your home and possessions is not the only reason to be concerned with mold.  Although most people are exposed to small amounts of mold or their spores on a daily basis without apparent harm, mold is an unsanitary condition that may present potential health risks to certain individuals.  

Where Does Mold Grow?

It is often a storage area where there is little heat and it is also where moisture can build up from condensation on the pipes or even a leak. The mold can actually build up quite a bit in the basement if you do not keep a close watch on the conditions, such as excess moisture and damp conditions which are the prime breeding areas for basement mold. 

Once mold spores settle in your basement, they will keep growing. Mold in basements can be found on wood, ceiling tiles, wallpaper, cement, sheet rock and insulation. There is no realistic way to get rid of all the basement mold that you have because mold spores are everywhere. Once you do find mold in the basement, though, you have to look at methods of basement mold removal.

Steps To Get Rid Of Mold

Step 1: Test for mold

One of the first steps in mold removal is to test your home. After all, most species of mold are invisible to the naked eye. By the time they grow in such amounts as to become visible, it's often too late to do anything but remove the source of the mold as best as you can. Fortunately, you can find a variety of mold testing kits online that will help you in this task.

Step 2: Find the moist spots 

Another good mold removal method is to simply be sure not to neglect areas in your home that are the most vulnerable to mold growth. These include your attic, your basement, and naturally damp areas such as your bathroom or kitchen. By observing these areas regularly, cleaning up puddles of water as soon as you see them, and keeping the humidity level down, you can do wonders for lowering the risk of mold growth in your home.

Step 3: Reduce humidity 

Since mold and mildew loves damp, moist areas to grow in, the best products that you can buy are vents. Placed in the bathroom or any area where moisture develops easily, it will keep mold from developing. To stop the mold and mildew from growing in a bathroom, turn on the bathroom fan to reduce humidity. When you take away heat or humidity, it makes it more difficult for this organism to grow.

Step 4: Increase Light  

Since mold and mildew prefer dark places to grow, their growth is reduced in well-lit areas. If you can, use the lights on in the bathroom or an open window to decrease the growth of mold and mildew.

Step 5: Clean moist surfaces regularly 

Mold and mildew loves to grow on the shower and the tubs that are not cleaned properly. It is the dampness and dirt that attracts mold and mildew to the surfaces. Only daily cleaning can remove the moisture and dirt and stop mold and mildew from coming back.

Step 6: Use mold and mildew products regularly

They go far to retard of these microscopic animals. Mold and mildew solutions have been created to control the unchecked growth of fungus in the home. These products make life a lot easier by ridding your home of fungus that can cause breathing problems.

When you don’t have the time to clean on a regular basis, you can be confident that nothing will grow on your surfaces.

How To Prevent Mold From Coming Back

Whether you suffer from severe allergies or you simply have concerns about the cleanliness of your house, mold removal is a topic that's is hot right now. When you need to get rid of mold, the best way to do it is to prevent its growth from occurring at all. Here are a few methods to consider when testing and cleaning your home.

Here are a few tips to get rid of mold and keep moisture from becoming a breeding ground in your home: 

  • The best way to get rid of mold in your home is to control moisture. In the summertime, when humidity is highest, this often means running air conditioners or a dehumidifier.
  • Ensure that bathrooms, dryers and other moisture-creating sources are vented to the outside 
  • Take care not to block any of your house’s air conditioning vents 
  • Install de-humidifiers in basements and crawlspaces. 
  • Use your kitchen’s exhaust fans when cooking 
  • Install insulation on cold surfaces like piping, air ducts or basement walls to lessen possibilities of condensation
  • Install moisture sensor alarms in potential water back-up and overflow areas to alert you when a leak occurs.
  • Mold-resistant materials play an important role in minimizing mold growth. However, unless mold-resistant products are installed in homes and buildings that are designed, built and maintained properly, they offer little protection against mold.
  • Keep kitchen and bathroom windows open, or use exhaust fans to move moisture outside.
  • Make sure your clothes dryer is vented to the outdoors.
  • Dehumidify your basement-the floor and walls can be a source of moisture buildup.
  • Reduce the potential for condensation on cold surfaces by adding insulation around windows, piping, exterior walls, roofing and floors. Once you have removed the entire mold infestation from your home, it is still important to control moisture levels in the structure. 
  • Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.
  • Keep the indoor humidity low. If possible, keep below 60 percent relative humidity. 
  • If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity. 
  • Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation. 
  • Run or install venting fans in high moisture areas, like the bathroom. 
  • Run a dehumidifier in moist areas, such as a basement or bathroom. 
  • Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur. 
  • Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.) 
  • Another good way to get rid of mold is to have your ventilation systems cleaned. Along with basements and attics, these are prime spots for mold growth. They're also breeding grounds for dust mites and germs as well
  • If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.
  • Make absolutely sure any drains are unblocked and making sure not to keep sprinklers or garden hoses running too close to your home, as this water may seem back into your basement. 
  • Is your basement carpeted? Remove it.
  • Be sure to dry up any spills as soon as you notice them, as once mold starts growing beneath your carpet, it's next to impossible to get rid of mold if it stays!

More Info On Mold Allergies

Mold: How To Survive When Your Home Is Toxic

Did you know that you could get allergies from mold? And this can cause breathing problems. Mold is everywhere, including inside your home as well as outside. Many people are allergic to mold and this can trigger an asthma attack What are the symptoms and how to fight it.

How To Get Rid Of Mold And Get Your Home Back

Did you know that some molds can be more poisonous to you and your body than pesticides? They can cause serious breathing problems for you and your family. Find out how to get rid of mold before it triggers severe breathing problems.

Mold Product Reviews - Destroy It Before It Grows

You can control your mold allergies by containing or stopping the growth of it in your home. There are many products on the market that say they can keep it from coming back. What you need to is a mold killer that will eliminate the problem in your home once and for all. Find the best mold removal products.

Kill Black Mold - 16 Tips To Stop Dangerous Mold

Black mold removal is something that you have to be careful with because black mold is toxic. You really do need to have good information about what black mold looks like and how it forms. These are simple tips you can use to get rid of black mold and still stay healthy.

Best Mold Products That Won’t Send You To ER

Whether you suffer from severe allergies or just want a clean home, mold removal is a hot topic. When it comes to getting rid of mold, the best way is to prevent its growth. When it comes to your home, these are best ways to remove mold.

More SAFE Guides

Asthma is not a condition that can be cured … but it can be managed at home. On a daily basis asthma products can help you to control breathing problems. This is a list of guides to help …

Many people with asthma find fewer complications when they find a management plan that really works. Read The SAFE Asthma Treatment Guide and discover the four steps to controlling asthma.  

With a little help from your doctor and the right plan of action, you can control your wheezing so that you can breathe easier.

And remember … any asthma treatment prescribed by a physician should always be taken as ordered, even if there are no symptoms. Your doctor is the gatekeeper to keeping you healthy.

Share this page:
Enjoy this page? Please pay it forward. Here's how...

Would you prefer to share this page with others by linking to it?

  1. Click on the HTML link code below.
  2. Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable.

Return To Homepage

Top Asthma Products

 Top Nebulizers   Nebulizers deliver asthma medicine and treat your bad symptoms when you need it.

 Peak Flow Meter       Every morning you can track your breathing problems and treatments that work.

Asthma Prevention

Air Cleaners For Allergy Sufferers

HEPA Vacuum Cleaners

     Allergy Bedding  Every night it blocks allergens and reduce breathing problems.

  Asthma Herbs      Asthma herbs relax the lungs and help to prevent future attacks.

Allergy Masks  -Protection from the dangerous allergens that trigger asthma attacks.

Allergy Cleaners

Pet Allergy Products

  Mold Removal     Stop  mold before it  triggers a bad allergic reaction.